5-18-09
We built supporters for are NXT so our propeller could reach the water to make it move. We also started building a device that can make the boat go left, right, back, and forward.
5/19/09
We finished building the robot and we also "survived" Mrs.Crowe stabability test.
5/21/09
We were testing the robot with the net. The net flipped the robot over.
5/26/09
We decided to re-add the paddle on both sides. Instead we are using tongue depressors. We also decided to put a remote controller so it will be easier to move. So far so good.We also took the spinner off
5/29/09
WELL TODAY AT THE ROBO FAIR WE DID A VERY GOOD JOB. ALL THE KIDS LOVED IT AND WE WAS WORKING A GROUP THE ENTIRE DAY. ARE ROBOT WORKED TO. ARE ROBOT WAS PERFECT. CP3PO
At the end of the day the robot started to well to stop working as well as the morning.But it worked well other than that.The kids would try to go to the pool first.
When the kids try to go to the pool first, we just tell all of them to go back to the board because you need to know all of these before actually seeing the robot.-Hemonaut
We did good at robofair. We worked together and all the kids loved it. We got a big bunch of people. One thing that was on and off was how it worked. First it worked OK, then it worked very very well, then it did not work good at all, and then it worked OK again. Tdawg2
5-18-09
We built supporters for are NXT so our propeller could reach the water to make it move. We also started building a device that can make the boat go left, right, back, and forward.
5/19/09
We finished building the robot and we also "survived" Mrs.Crowe stabability test.
5/21/09
We were testing the robot with the net. The net flipped the robot over.
5/26/09
We decided to re-add the paddle on both sides. Instead we are using tongue depressors. We also decided to put a remote controller so it will be easier to move. So far so good.We also took the spinner off
5/29/09
WELL TODAY AT THE ROBO FAIR WE DID A VERY GOOD JOB. ALL THE KIDS LOVED IT AND WE WAS WORKING A GROUP THE ENTIRE DAY. ARE ROBOT WORKED TO. ARE ROBOT WAS PERFECT. CP3PO
At the end of the day the robot started to well to stop working as well as the morning.But it worked well other than that.The kids would try to go to the pool first.
When the kids try to go to the pool first, we just tell all of them to go back to the board because you need to know all of these before actually seeing the robot.-Hemonaut
We did good at robofair. We worked together and all the kids loved it. We got a big bunch of people. One thing that was on and off was how it worked. First it worked OK, then it worked very very well, then it did not work good at all, and then it worked OK again. Tdawg2